Donjoy Isoform SI Joint Belt Features
- Adjustable belt wings allow clinicians to customize the fit for a wide range of patients easily
- Adjustable pull tabs help provide targeted compression and help reduce the rotation of the brace
- Pull tab system independently tightens the top and bottom, allowing patients to localize compression
How to use Donjoy Isoform SIO Belt
- Step 1. Loosen the Brace
Loosen the brace by detaching the pull tab from the loop exterior. Pull the brace in opposite directions - Step 2. Position the Brace
Place the belt about one inch above the widest part of the hips. Center the rear section of the belt at the midline of the lower back, so that the belt is just above the crease of the buttocks - Step 3. Secure the Brace
Secure the hook portion of the donning mitt to the loop exterior. Before tightening the brace, make sure the rear panel section is positioned evenly on both sides of the patient. Have the patient slip their thumbs through the holes in the pull tabs and pull the tabs away from the body. Secure the pull tabs to the loop exterior. Adjust compression as needed
Cleaning Instructions:
- Hand wash in cold water, less than 86°F (30°C)
- Use mild Soap
- Air dry
