NEB400 Mini Mesh Nebulizer Cup Features
- Quiet, small, fast, and easy to use
- MiniMesh Nebulizer Cup is budget-friendly
- It can be changed within seconds
What to buy with Sunset MiniMesh Nebulizer Cup
- Sunset MiniMesh Nebulizer Pedi Mask
- Sunset MiniMesh Nebulizer Mouthpiece
- Sunset Mini Mesh Nebulizer Adult Mask
Cleaning Instructions of Sunset MiniMesh Nebulizer Cup
After Each Use
- Remove the Medication Cup by pressing the button and pulling up in the direction of the arrow.
- Open the Medication Cup and empty any remaining solution and close cap.
- Fill the Medication Cup with Distilled Water and nebulize for 1-2 minutes until any residual medication has been removed from the mesh holes. You can do a quick visual inspection of the mesh holes to ensure they are clear.
- Turn of the device and remove from power source.
- Remove the medication cup and rinse thoroughly with distilled water. Use your fingers to scrub as needed.
- Allow everything to air dry on a clean towel or paper towel.
Disinfection (At least twice a week)
- Before disinfection, clean the device as you normally would. (Shown in the instructions above.)
- 2. Bring a large pot of water to a boil and turn off heat. Place medication cup in boiled water for 10 minutes.
- 3. Carefully remove medication cup from boiled water to lower the temperature. Once cooled, shake off any excess water.
- 4. Allow to air dry on a clean towel or paper towel.
- 5. Visually inspect the parts after cleaning for any build up. If you see anything, repeat the cleaning steps.
