What do Sunset Portable Suction Machine Accessories include?
- Connectors and Filter
- Canister, Tubing, Connectors, and Filter
- Replacement Power Adapter (Without Cord)
- DC Mobile Power Adapter
- Replacement Power Cord Without Adapter
- Carrying/Storage Bag
What to buy with Sunset Suction Machine Accessories
- McKesson Fluid Solidifier
- Cardinal Health Y Tubing Connector
Also Available (Sold Separately):
- Sunset Portable Suction Machine
Cleaning Instructions of Sunset Healthcare Portable Suction Machinee Accessories
- It is recommended that the tubing and canister be thoroughly cleaned with hot water after each use and be cleaned with a mild detergent after the last treatment of the day. If your physician or respiratory therapist specifies a different cleaning procedure, follow their instructions.
- The filter cannot be cleaned
- If the filter gets wet, or becomes contaminated or clogged, it must be replaced
- The device and accessories may come into contact with infectious material and be contaminated during their lifetime. For this reason, the device and its accessories should be decontaminated before disposal or transportation. Dispose of the device properly at the end of its service life
Rinsing Sunset Suction Machine Accessories (after each treatment)
- Disconnect the tubes, canister and the filter cover. Rinse the tubes and canister with water.
- Dry them with a clean, soft towel or let air dry
- Reassemble the product when completely dry and put in a clean, sealed container
Disinfection of Sunset Portable Suction Machine Accessories
- It is suggested that the unit is disinfected after each treatment
- Using one part white vinegar with three parts distilled water, make a bath to submerge the tubes and canister
- Disconnect the tubes and canister from the suction machine and filter. Wash the tubes and canister in warm water and mild detergent. Then wash them in hot tap water
- Submerge the tubes and canister in the vinegar and water solution bath for 30 minutes
- Dry tubes and canister with a clean soft towel or let air dry
- Reassemble the product when completely dry and put in a clean, sealed container
Changing the Filter of Sunset Suction Machine
- Open the small circular hatch on the bottom of the unit counter-clockwise. Replace the BF018 foam air filter if it appears to be dirty, or after 3 months of use.
How to install the filter in Sunset Healthcare Suction Machine?
- Open the accessories bags and take out the two connector tubes and the filter
- Connect one end of the short tube to the air input port and the other end to the filter
- Connect the filter to the suction canister with the long connector tube
- Inspect suction tubing and canister for leaks or cracks before each use
